معدات الغسيل
ماكينة غسيل الرمال لمحطات غسيل الركام والمعادن
Vanore Mining supplies sand washing machine equipment for aggregate, manufactured sand and selected mineral washing duties. The wheel-bucket arrangement washes prepared material in a water-filled tank, lifts the retained sand and drains water before discharge.
Wheel-Bucket Equipment for Sand Washing
The wheel rotates through the washing tank, agitating the feed and lifting settled sand in its buckets. Water drains through the bucket screens before the material reaches the discharge point. Suspended fines leave through the overflow, while retained sand moves to the product discharge.
Vanore washing equipment works alongside sizing screens and prepared-feed handling. The washing duty depends on the feed grading, the amount and character of contamination, and the water entering the tank. It is distinct from intensive clay scrubbing or chemical purification.
معرض معدات غسل الرمال
Wheel Washing and Connected Equipment
Wheel-bucket washing
The wheel and tank combine agitation, sand lifting and drainage. The arrangement is intended for feed that can release unwanted fines through washing and hydraulic separation.
Screening before washing
Sizing limits the oversize entering the tank and separates material into appropriate processing streams. The screen and washer therefore have different roles.
Additional dewatering
Where the product needs further moisture reduction, dewatering equipment can follow the washer. The required product moisture guides the choice of drainage and any additional dewatering stage.
Water and fines handling
Overflow contains water and suspended solids. Fine-material recovery and water treatment handle this overflow as connected plant stages.
Mechanical Features of the Sand Washer
Tank and rotating wheel
The tank receives the feed and wash water, while the driven wheel lifts settled material toward the product discharge.
Draining bucket screens
Screen openings retain the intended sand fraction while allowing water to drain. The drainage arrangement links sand retention with the discharge condition.
Drive assembly
The motor and reduction drive provide the wheel movement. Motor power is listed separately for each configuration in the model table.
Separate overflow and product outlets
Washed sand and fines-bearing water follow different paths. Their connections allow the washer to work within a controlled material and water circuit.
تطبيقات آلة غسل الرمال
Manufactured sand and quarry aggregates
Crushing and sand-making equipment can produce feed containing loose stone powder and surface contamination. Screening prepares a suitable fraction for washing. The wheel washer separates retained sand from part of the suspended fine material; the finished grading still depends on the incoming feed and the wider aggregate production line.
Concrete and construction sand
Washing can reduce unwanted silt and loose contamination in suitable natural or manufactured sands. For concrete aggregate, the washed product is assessed against the required grading and quality specification. Feed characteristics, final grading and contamination are assessed together, with separate testing of the washed product where a project specification requires it.
Quartz sand preparation
A washer can form an early cleaning stage in a quartz sand processing circuit. Removing loose fines is different from separating iron-bearing minerals, removing chemically bound impurities or producing high-purity silica. Mineral separation and further purification are added according to the feed and target silica quality.
Feed Materials and Washing Duty
The equipment handles prepared sand and suitable fine aggregate after oversize control. تصنيف الأعلاف, clay condition and the required retained fraction determine the washing arrangement. Tough clay-bound lumps may need a separate scrubbing stage; excessive water or unstable feed can carry useful fine sand into the overflow.
Sand Washing Machine Model Specifications
| مواصفة | Processing capacity (ذ) | قوة المحرك (كيلوواط) |
|---|---|---|
| 2208 | 15–40 | 4 |
| 2611 | 20–65 | 5.5 |
| 2914 | 50–100 | 7.5 |
| 3020 | 80–200 | 11 |
| 3121 | 90–260 | 11 |
Processing capacity describes the solids-handling duty of the washer. Water demand and product yield are assessed for the feed and washing circuit. تصنيف الأعلاف, contamination and water conditions affect the installed duty.
Washed Sand, Overflow and Water Return
| تدفق | Connected equipment | Plant role |
|---|---|---|
| الأعلاف المعدة | Sizing screen and feed conveyor | Control the material entering the washing tank |
| Retained sand | Washing wheel and discharge conveyor | Lift and transfer the washed product |
| Product drainage | Bucket screens and optional downstream dewatering | Separate water from the retained material |
| Overflow | Fine-material recovery or water treatment | Handle suspended solids and process water |
The washer fits between feed preparation and product handling. Feed-control equipment supports steady material delivery, while the overflow circuit is arranged around fines recovery and water management. Vanore manufacturing capabilities cover the washing assembly and its equipment interfaces.
الأسئلة الشائعة لغسالة الرمل
What does a wheel sand washing machine remove?
It can wash loose fines and surface contamination from suitable sand and fine aggregate. The extent of cleaning depends on the feed, contamination and water conditions; strongly bound clay may require separate scrubbing.
How are washing and dewatering combined?
Washing removes unwanted fines and loose contamination. Bucket screens drain water as sand is lifted, and an additional dewatering stage can follow where lower product moisture is required.
How is the washing-water supply determined?
تصنيف الأعلاف, contamination and the overflow circuit guide water demand. The model table provides solids-processing capacity and motor power for each configuration.
Where does washing fit in quartz sand processing?
Washing removes loose contamination early in the process. Mineral separation and other purification stages are added according to the impurities present and the required silica specification.
اتصل بشركة فانور للتعدين
Discuss Your Sand Washing Equipment
Contact Vanore Mining about the feed material, الدرجات, required throughput and available water circuit. These details define the washing assembly and its connection to screening and product handling.