碎石设备
用于采石场和骨料破碎的冲击式破碎机
Vanore Mining 为采石场提供反击式破碎机设备, 总计的, 采矿和选矿厂. 该破碎机利用冲击力来破碎中硬材料并生产用于建筑应用的成型骨料.
品牌及产品概览
Vanore Mining 的重型反击式破碎机
Vanore PF impact crushers combine a horizontal rotor, blow bars and impact aprons for secondary stone crushing and aggregate shaping. Limestone and low-abrasion quarry stone are common applications. 进料尺寸, required grading and material abrasiveness guide the equipment and wear-part selection.
该设备可与振动给料机配合使用, 颚式破碎机, 固定式碎石厂中的振动筛和输送机.
制造展示
反击式破碎机设备图库
破碎选项
反击式破碎机类型和配置选项
二次破碎
用于初级颚式破碎后用于中型石料破碎.
骨料整形
支持建筑骨料应用的立方颗粒形状.
石灰石破碎
适用于采石场中的石灰石和类似的中硬材料.
完整的工厂使用
可与喂食器配套, 完整生产线中的筛网和输送机.
优点
反击式破碎机设计特点
高效冲击式破碎
转子和反击板支持在二次破碎任务中大幅减少材料.
Aggregate Reduction and Grading
Impact fragmentation can improve particle form in suitable material. The result depends on feed and operating conditions; final grading is established with screening.
重型室
The frame supports the rotor and crushing chamber during continuous quarry operation.
Application-Matched Wear Parts
Blow bars and impact plates are selected to suit the material abrasiveness and crushing duty.
应用领域
反击式破碎机应用
采石场破碎
用于采石场和石料生产厂的二次破碎.
总产量
生产混凝土建筑骨料, 沥青和路基材料.
石灰石加工
适用于水泥中石灰石的破碎, 骨料和工业材料生产线.
采矿准备
可以在筛选或研磨之前减少选定的矿石和矿物材料.
Prepared Recycling Feed
Prepared concrete and masonry can be crushed for recycling after sorting, metal separation and feed-size control.
适用材料
适用于冲击式破碎的物料
Material abrasiveness and breakage behavior guide application selection. Upstream handling addresses sticky feed and removes unwanted metal before crushing.
反击式破碎机技术规格
| 模型 | Rotor diameter × width (毫米) | Feed opening (毫米) | 最大进料尺寸 (毫米) | 电机功率 (千瓦) | 重量 (t) | Overall dimensions (毫米) |
|---|---|---|---|---|---|---|
| PF-1007 | 1000×700 | 400×730 | 300 | 37-45 | 12 | 2330x1660x2300 |
| PF-1010 | 1000×1050 | 400×1080 | 350 | 45-55 | 15 | 2370x1700x2390 |
| PF-1210 | 1250×1050 | 400×1080 | 350 | 110 | 17.7 | 2680x2160x2800 |
| PF-1214 | 1250×1400 | 400×1430 | 350 | 132 | 22.4 | 2650x2460x2800 |
| PF-1315 | 1320×1500 | 860×1520 | 500 | 200 | 27 | 3180x2720x3120 |
| PF-1320 | 1300×2000 | 993×2000 | 500 | 250 | 34 | 3220x3100x3120 |
| PF-1520 | 1500×2000 | 830×2040 | 700 | 315-400 | 50.6 | 3959x3564x3330 |
| 模型 | 容量 (吨/小时) |
|---|---|
| PF-1007 | 30-70 |
| PF-1010 | 50-90 |
| PF-1210 | 70-130 |
Feed size and finished aggregate
The table lists the inlet dimensions and maximum feed size for each PF model. 饲料分级, rotor operating conditions and impact-apron settings determine the crushing duty, while the screening circuit separates the required aggregate sizes.
Material strength, 磨蚀性, feed grading and the required reduction affect capacity. Plant sizing accounts for both fresh feed and screen oversize returned for further crushing. The motor ratings shown apply to the crusher drive.
产品结构
Vanore反击式破碎机主要结构
进料口
从上游给料和破碎设备接收材料.
转子组件
驱动板锤冲击并减少传入材料.
板锤
破碎作业中撞击物料的关键磨损部件.
冲击板
支持腔内冲击破碎和粒度减小.
卸货区
将破碎的材料释放到输送和筛选设备.
支撑架
使破碎机机身和驱动部件保持工作对齐.
Impact Crusher Equipment Scope and Technical Details
| 设备组 | 功能及连接 |
|---|---|
| Rotor and blow bars | Deliver impact to the incoming material. Blow-bar dimensions, fastening and material selection must suit the actual rotor and feed duty. |
| Impact aprons and liners | Provide impact surfaces inside the chamber. Wear condition and operating clearances influence material reduction and product grading. |
| Drive and housing | Carry the rotor assembly and transmission. Installation requires the selected machine envelope, drive access and service clearances. |
| Connected plant equipment | Feeders deliver material, metal-removal equipment protects the material stream, screens separate product grades and conveyors connect the stages. The equipment combination follows the plant layout. |
Wear-part matching and plant output
Vanore supplies impact crushers and matching wear parts for quarry and aggregate production. Blow-bar selection considers material abrasiveness, feed conditions and the rotor arrangement. For replacement parts, share the crusher model and part identification or fastening dimensions so our team can check the fit.
一个 sizing screen separates finished aggregate from material requiring further reduction. 一个 compression-crushing stage provides an alternative route for suitable hard, abrasive feed, 尽管 集尘 addresses the relevant dry transfer and enclosure points.
反击式破碎机常见问题解答
How does a PF impact crusher reduce stone?
Rotor-mounted blow bars strike the incoming stone and throw it against impact surfaces inside the chamber. Repeated impact reduces the feed before it leaves for conveying and screening.
Which materials suit impact crushing?
Limestone and low-abrasion quarry stone are common applications. Material strength, 磨蚀性, feed grading and the required product guide the choice of crusher and wear parts. Highly abrasive rock calls for comparison with a compression-crushing route.
How is the feed size matched to the crusher?
Each model has a listed maximum feed size alongside its inlet dimensions. Upstream crushing and feeding equipment prepare material within that limit and deliver it to the crusher inlet.
How does the crusher produce the required aggregate sizes?
Crushing conditions and impact-apron settings influence the product, while a sizing screen separates the required grades. Oversize can return for further crushing, and this circulating load is included in plant sizing.
What information helps identify replacement wear parts?
Share the crusher model, part identification and available dimensions or drawings. Blow bars and liners are matched to the rotor, fastening arrangement and material duty.
联系瓦诺尔矿业
Discuss Your Impact Crusher Application
分享您的材料类型, 最大进料尺寸, required throughput and finished aggregate sizes. Vanore Mining 可以检查设备配置及其与您工厂的连接.